One of the most common causes of Construction Sites Accident is slips and falls. Slips are when you fall on your own or another person’s equipment. Falls can also occur when someone trips over an object and falls down stairs, steps or other structures. You can look for personal injury lawyers for any incident. Slip-and-fall incidents can happen anywhere on a construction sites.
In front of a truck, while working with toolconstruction siteside; slippery floors can cause accidents anytime there is moisture present—even in dry climates where ice may not be present yet due to high temperatures during winter months (which means more people should be aware about keeping their shoes on).
In addition to wet conditions making things more challenging for workers who are trying hard not to get hurt themselves by falling off ladders onto concrete slabs below them (or worse), loose materials such as boxes stacked up high against walls could easily slip away from their proper position causing injury due again. Because there wasn’t anything holding them securely.
Yet still climbing those steep slopes up high enough levels where workers sometimes need help reaching higher levels themselves without having access only certain areas near ground level where things were secured properly thanks again primarily focusing mainly providing adequate support systems within each section rather than everywhere else across entire buildings simultaneously combined together into single large project(s)
Exposure to Harsh Chemicals Or Exhaust Fumes:
Exposure to harsh chemicals or exhaust fumes can cause health problems. These include skin rashes, eye irritation, headaches and nausea. Exposure to these harmful substances can also affect your body’s ability to process other chemicals and odors normally found in the workplace. If you are exposed to these kinds of toxins on a regular basis it’s important that you take precautions such as wearing protective clothing (long sleeve shirts), having access to fresh air when possible (use windows instead of doors) and washing after eating/drinking food containing high levels of sodium chloride (salt).
Excessive Vibration:
Vibration is a common cause of injuries on construction sites. It can be caused by the movement of the machine, or by the operator, or even by weather conditions. For example, if you’re driving a forklift and it reaches its maximum speed before you pull away from an obstacle, then that speed will be applied to your body in an unnatural way. The same thing happens when you’re operating a vibratory tool such as a drill—the object being drilled will move faster than our muscles can handle without injury occurring. This causes tension between our muscles and bones which results in pain and fatigue over time (further increasing risk for injury).
Dehydration:
You may not realize it, but dehydration can be a real problem on construction sites. Dehydration is when your body loses fluids and minerals, which causes you to feel lightheaded and dizzy. Signs include:
- Feeling thirsty
- Taking on more fluid than usual (more than one glass of water)
- Dizziness or fainting spells
Motorcycle Accidents:
Motorcycle accidents are common on construction sites. They can be fatal, but they are also common and can be caused by other drivers, pedestrians or motorcyclists.
Vehicle Accidents:
In construction, vehicle accidents are the most common cause of work-related injuries. These can be caused by a number of factors, including:
- Lack of safety training for drivers and workers.
- Poor supervision by supervisors or managers.
- Inexperienced or distracted drivers (elderly, alcohol-impaired).
Many workplace crashes occur due to poor road conditions and weather conditions that affect visibility; these factors may contribute to an increase in crashes on construction sites as well as other sites where vehicles are used to transport goods or people around town (e.g., retail stores).
Battered Machinery:
Machinery is a dangerous tool. It can be used to injure people in the wrong way, at the wrong place and at the wrong time. Machinery is not always consistent with human beings who are working around it. If there are no safe ways for workers to avoid being hit by machinery or get out of harm’s way when they’re being hit, then workers will need to rely on their training and experience when using these machines (which may not always be enough).
These Are the Most Common Causes of Construction-related Injuries:
- Electric shock
- Falling objects – such as scaffolding, ladders and signboards
- Impact with machinery – including forklifts and bulldozers
- Electrical accidents caused by faulty wiring or electrical equipment 5,6,7
- Keep visiting infiniteinsighthub for more informative articles.
